Support
One Year
Male
Equal
Hexagon
33 - 210 Degree
USL/CNL: Flexible Metal Conduit, Liquid-Tight, Trade Sizes 3/8(12), 1/2(16), 3/4(21), 1(27), 1-1/4(35), 1-1/2(41) and 2(53).
he results of this investigation indicate that the products evaluated comply with the applicable requirements
| Per Standard No. | UL 360 | Edition/Revision Date | Seventh/October 9, 2020 | |||
| Per Standard No. | CSA C22.2 No. 56-17 | Edition/Issue Date | Seventh October 01, 2017 | |||
| Per Standard No. | UL 746A | Edition/Revision Date | Sixth/June 27, 2020 | |||
(e) for liquid-tight flexible metal conduit, the dry ("60 ºC","75 ºC" or "105 ºC", as applicable), oil ("60 ºC","75 ºC", or in accordance with Clause 6.1.8), and low temperature rating (in accordance with Table 9) of the thermoplastic jacket; and
(f) the words "BONDING CONDUCTOR REQUIRED - CONDUCTEUR DE CONTINUITÉ DES MASSES OBLIGATOIRE".
*The equivalent French wording is «USAGE SPÉCIAL».
Direct burial stiffness test marking
Finished liquid-tight flexible metal conduit that complies with the test in Clause 7.2.9 may be surface marked "Direct Burial", "Burial", "Dir Burial", or "Dir Bur".
6.2 Marking on coils, reels, or cartons
Each coil, reel, or carton of flexible metal conduit and liquid-tight flexible metal conduit shall be tagged
or marked to indicate plainly the following:
a) the manufacturer's identification;
b) the date of manufacture or the dating period of manufacture. The dating period shall not exceed
any three consecutive calendar months. The date or dating period may be abbreviated or coded;
c) the metric designator trade size of the conduit, e.g., 16 (1/2);
d) for 10 (5/16) and 14 (7/16) flexible metal conduit, the words "SPECIAL PURPOSE"*;
e) for liquid-tight flexible metal conduit, the dry ("60 °C", "75 °C" or "105 °C", as applicable),
oil ("60 °C", "75 °C", or in accordance with Clause 6.1.8), and low temperature rating (in accordance
with Table 9) of the thermoplastic jacket; and
f) the words "BONDING CONDUCTOR REQUIRED - CONDUCTEUR DE CONTINUITÉ DES MASSES
OBLIGATOIRE".
* The equivalent French wording is «USAGE SPÉCIAL»
Canadian standard for Flexible Metal Conduit and Liquid-Tight Flexible Metal Conduit CSA C22.2 NO. 56-17:
| Test Name: | Standard/Clause |
| Physical Properties: | CSA C22.2 No. 56-17/Clause: 7.1.1 |
| Deformation Test: (#) | CSA C22.2 No. 56-17/Clause: 7.1.2 |
| Flexibility Test: | CSA C22.2 No. 56-17/Clause: 7.2.4 |
| Vertical Flame Test (FT1): | CSA C22.2 No. 56-17/Clause: 7.2.5.1 |
| Cold Impact Test: | CSA C22.2 No. 56-17/7.2.6 |
| Pinhole Test: | CSA C22.2 No. 56-17/7.2.7 |
1.Q: What kind of material you can offer?
A: We can offer you GALVANIZED STEEL, STAINLESS STEEL, ALUMINUM, Zinc, etc.
2.Q: What kind of standard you are following?
A: We are producing following by UL standard, most popular around the world,
of course, we also have customized products.You can provide your specification.
3.Q: Could you change the size for the customer?
A: Yes, we do for some customer special size.
4.Q: How many days can you deliver the order?
A: Normally after deposit or L/C 20-30 days, actually it depends on your request.
5.Q: What about the payment?
A: We can accept L/C, T/T, D/P and trusted payment methods.
6.Q: Do you provide samples?
A: yes, we can offer the standard product sample freely, but we do not bear the freight. Sample preparation will take some time, and if you asked to use DHL, FedEx, etc. to send samples, you can inform us in advance to prepare.
7.Q: Are you a trading company or manufacturing company?
A: Both we are, we have ten years experiences in foreign trading business and more than five years in electrical conduit industry. Of course, we are always expanding our business.
8.Q: How can you guarantee your products?
A: we guarantee your 100% satisfaction on all our products. Please feel free to feedback us immediately if you are not satisfied with our quality or service. If the product does not meet the contract requirements, we will send you a free replacement or give you compensation in the next order. For foreign orders, we ensure every order carefully. In some special cases, we will give some discounts as a solution.
9.Q: How about your capability in manufacturing?
Based on reasonable price, good quality, great after service, and Workers' Passion and Effort, we are capable of manufacturing 6000 tons of steel conduit per year and 4000 tons of die casting and steel accessories anually.
Choosing us is the best choice.
USL/CNL: Flexible Metal Conduit, Liquid-Tight, Trade Sizes 3/8(12), 1/2(16), 3/4(21), 1(27), 1-1/4(35), 1-1/2(41) and 2(53).
he results of this investigation indicate that the products evaluated comply with the applicable requirements
| Per Standard No. | UL 360 | Edition/Revision Date | Seventh/October 9, 2020 | |||
| Per Standard No. | CSA C22.2 No. 56-17 | Edition/Issue Date | Seventh October 01, 2017 | |||
| Per Standard No. | UL 746A | Edition/Revision Date | Sixth/June 27, 2020 | |||
(e) for liquid-tight flexible metal conduit, the dry ("60 ºC","75 ºC" or "105 ºC", as applicable), oil ("60 ºC","75 ºC", or in accordance with Clause 6.1.8), and low temperature rating (in accordance with Table 9) of the thermoplastic jacket; and
(f) the words "BONDING CONDUCTOR REQUIRED - CONDUCTEUR DE CONTINUITÉ DES MASSES OBLIGATOIRE".
*The equivalent French wording is «USAGE SPÉCIAL».
Direct burial stiffness test marking
Finished liquid-tight flexible metal conduit that complies with the test in Clause 7.2.9 may be surface marked "Direct Burial", "Burial", "Dir Burial", or "Dir Bur".
6.2 Marking on coils, reels, or cartons
Each coil, reel, or carton of flexible metal conduit and liquid-tight flexible metal conduit shall be tagged
or marked to indicate plainly the following:
a) the manufacturer's identification;
b) the date of manufacture or the dating period of manufacture. The dating period shall not exceed
any three consecutive calendar months. The date or dating period may be abbreviated or coded;
c) the metric designator trade size of the conduit, e.g., 16 (1/2);
d) for 10 (5/16) and 14 (7/16) flexible metal conduit, the words "SPECIAL PURPOSE"*;
e) for liquid-tight flexible metal conduit, the dry ("60 °C", "75 °C" or "105 °C", as applicable),
oil ("60 °C", "75 °C", or in accordance with Clause 6.1.8), and low temperature rating (in accordance
with Table 9) of the thermoplastic jacket; and
f) the words "BONDING CONDUCTOR REQUIRED - CONDUCTEUR DE CONTINUITÉ DES MASSES
OBLIGATOIRE".
* The equivalent French wording is «USAGE SPÉCIAL»
Canadian standard for Flexible Metal Conduit and Liquid-Tight Flexible Metal Conduit CSA C22.2 NO. 56-17:
| Test Name: | Standard/Clause |
| Physical Properties: | CSA C22.2 No. 56-17/Clause: 7.1.1 |
| Deformation Test: (#) | CSA C22.2 No. 56-17/Clause: 7.1.2 |
| Flexibility Test: | CSA C22.2 No. 56-17/Clause: 7.2.4 |
| Vertical Flame Test (FT1): | CSA C22.2 No. 56-17/Clause: 7.2.5.1 |
| Cold Impact Test: | CSA C22.2 No. 56-17/7.2.6 |
| Pinhole Test: | CSA C22.2 No. 56-17/7.2.7 |
1.Q: What kind of material you can offer?
A: We can offer you GALVANIZED STEEL, STAINLESS STEEL, ALUMINUM, Zinc, etc.
2.Q: What kind of standard you are following?
A: We are producing following by UL standard, most popular around the world,
of course, we also have customized products.You can provide your specification.
3.Q: Could you change the size for the customer?
A: Yes, we do for some customer special size.
4.Q: How many days can you deliver the order?
A: Normally after deposit or L/C 20-30 days, actually it depends on your request.
5.Q: What about the payment?
A: We can accept L/C, T/T, D/P and trusted payment methods.
6.Q: Do you provide samples?
A: yes, we can offer the standard product sample freely, but we do not bear the freight. Sample preparation will take some time, and if you asked to use DHL, FedEx, etc. to send samples, you can inform us in advance to prepare.
7.Q: Are you a trading company or manufacturing company?
A: Both we are, we have ten years experiences in foreign trading business and more than five years in electrical conduit industry. Of course, we are always expanding our business.
8.Q: How can you guarantee your products?
A: we guarantee your 100% satisfaction on all our products. Please feel free to feedback us immediately if you are not satisfied with our quality or service. If the product does not meet the contract requirements, we will send you a free replacement or give you compensation in the next order. For foreign orders, we ensure every order carefully. In some special cases, we will give some discounts as a solution.
9.Q: How about your capability in manufacturing?
Based on reasonable price, good quality, great after service, and Workers' Passion and Effort, we are capable of manufacturing 6000 tons of steel conduit per year and 4000 tons of die casting and steel accessories anually.
Choosing us is the best choice.
